Pattern Projection+ Function (Projecting the Entire Pattern onto the Fabric)

With this function, the embroidery frame will automatically move to change the projection area so that the entire pattern will gradually be projected onto the fabric. This allows you to check the area to be embroidered and how the pattern will be placed.

1. Make sure that the embroidery frame is attached to the machine, and then touch .

   This function is available on the Embroidery Edit screen, Embroidery screen, and the Stitch Settings screen of IQ Designer. Here, as an example, the entire pattern is projected on the Embroidery Edit screen.

   
   • The embroidery pattern is projected onto the fabric.

2. Touch and to start projecting the entire pattern.

   
   • The embroidery frame moves, gradually changing the area of the pattern being projected, until the entire pattern has been projected onto the fabric.
     
   1. Touch to temporarily pause the embroidery frame.
   2. Touch to return the embroidery frame to its original position.
   3. Select the speed at which the embroidery frame moves.
   4. The part of the pattern indicated by blue lines at the four corners will be projected onto the fabric.
      • The movement of the embroidery frame varies depending on the size and placement of the embroidery pattern.
      • While paused, you can change the location of the projection area on the fabric by dragging the blue line at one of the four corners.