Step 4 Embroidering

1. If an iron-on transfer sheet is used, transfer the image onto fabric.

   For details on transferring from iron-on transfer sheets, refer to the instructions for the iron-on transfer sheets.

2. Hoop the fabric in the embroidery frame.
   
3. Place the positioning sheet on the fabric to be embroidered so that it is aligned with the printed image.
   
   • If the positioning sheet is too large, cut it to an appropriate size so it can easily be used for aligning the positions.
   • Tape the positioning sheet to the fabric to secure it in place.
4. Attach the embroidery frame to the embroidery machine.

   Be sure that the positioning sheet does not move out of place.

5. Align the needle with the mark at the center of the positioning sheet.
   • If the embroidery machine has a built-in camera, press the start positioning button to detect the positioning mark and automatically align the embroidering position.
   • With other embroidery machines, manually align the positions.
6. After positioning is finished, remove the positioning sheet from the fabric.
7. Start the embroidery machine to embroider the pattern.
   
   • For details on using the embroidery machine, refer to the instruction manual included with the machine.
   • Some patterns of completed samples for "Print and Stitch" are provided in the following folder.
     Documents (My documents)\Palette Ver.11\Sample\Layout & Editing\Print and Stitch