Step 1 Selecting the Design Page size

1. Click , then [Design Settings].
   
2. Click under [Machine Type], select
   360 × 360 mm (Jumbo Frame) from the [Hoop Size] selector under [Page Size], and then click [OK].
   

   Check the size of embroidery frames that can be used with your machine before changing the setting.

3. The Design Page appears on the screen as shown below.
   
   1. Side 1 embroidering area
      Area embroidered first
   2. Side 2 embroidering area
      Area embroidered second

      The embroidery pattern is automatically divided into the different areas.

      The embroidery pattern is split with a section overlapping 1 and 2.
      If the pattern arranged in this section uses satin stitches, the stitch may change when the pattern is split. Therefore, we recommend shifting the pattern or changing the sew type to fill stitches.