Specify settings for background fill pattern

Stippling Fill

1. Specify the spacing between the patterns.

   1.0 mm	7.0 mm

2. Specify sewing attributes for the stippling.

   Stippling Stitch

Decorative Fill

1. Specify the spacing between the patterns.
2. Click to select a decorative fill pattern.
3. Specify the size of the decorative fill pattern.
4. Select this check box to connect the edges of objects with running stitches.

   Decorative Fill Stitch

   With patterns that are not connected at the top and bottom or at the left and right as shown below, select this check box to reduce the feed.

   

5. Select this check box to not embroider the part of the background overlapped by the inner pattern.
   Clear this check box to sew the created stitching first, then sew the overlapping pattern.

   Check box selected.
   Check box cleared.

Crosshatch/Stripe Fill

1. Specify the spacing between the patterns.

   0.0 mm	6.0 mm

2. Select the fill type.

   Crosshatch	Stripes

3. Specify the size of the pattern (or line spacing).

   7.0 mm	30.0 mm

4. Specify the pattern angle.

   45°	90°

5. Select this check box to not embroider the part of the background overlapped by the inner pattern.
   Clear this check box to sew the created stitching first, then sew the overlapping pattern.

   Check box selected.
   Check box cleared.

   • This function is not available when the selected embroidery frame has a width or height of less than 100 mm.
   • This function is not available when the selected embroidery frame is a multi-position hoop.
   • This function is not available if the [Name Drop] attribute is applied to a part of the pattern.