Line sewing attributes

The available attributes differ depending on the selected sew type.

Zigzag Stitch

Under sewing	Off	On
Zigzag width	Narrow	Wide
Density	Coarse	Fine
Half Stitch	Off The inside stitching is dense.	On The stitching is adjusted to a more even density.
Sharp Corners
Miter limit	Specify the sharpness of corners in zigzag stitching.
Connection Points	This sewing attribute is available only when a text pattern is selected. Selecting connection point positions in a text pattern

Running Stitch

Run pitch

Specify the length of one stitch.

Short

Long

Run time(s)

Specify the number of times the outline is sewn.

1 time

5 times

Connection Points

This sewing attribute is available only when a text pattern is selected.

Selecting connection point positions in a text pattern

Triple Stitch

Run pitch

Specify the length of one stitch.

Short

Long

Connection Points

This sewing attribute is available only when a text pattern is selected.

Selecting connection point positions in a text pattern

Motif Stitch

	Select a pattern for the motif stitch. Click to display the [Browse] dialog box. Select a folder, and then select the desired pattern (.pmf file) from the list of patterns that appears.
	Specify the pattern size. The pattern can be enlarged or reduced while maintaining the width-to-height proportion.		Smaller	Larger
	1 Height (vertical length)	Specify the pattern height.	Short	Tall
	2 Width (horizontal length)	Specify the pattern width.	Short	Long
Maintain aspect ratio	When selected, the height-to-width proportions of the pattern are maintained.
H-Arrange (horizontal arrangement)	Specify the arrangement of the patterns along a horizontal axis. All patterns or each pattern can be flipped along the horizontal axis.		Normal Mirror Alternate
V-Arrange (vertical arrangement)	Specify the arrangement of the patterns along a vertical axis. All patterns or each pattern can be flipped along the vertical axis.		Normal Mirror Alternate
Offset	0.0 mm		Offset: 4.5mm
Spacing	Narrow		Wide
Run pitch	Specify the length of one stitch.		Short	Long
Start/End Type	Feed		Run
	If the entry/exit points of sewing have been changed
Connection Points	This sewing attribute is available only when a text pattern is selected. Selecting connection point positions in a text pattern

Stem Stitch

Width	Narrow	Wide
Spacing	Narrow	Wide
Angle	45°	135°
Stitch Type	Triple	Single
Start/End Type	Feed	Run
	If the entry/exit points of sewing have been changed
Connection Points	This sewing attribute is available only when a text pattern is selected. Selecting connection point positions in a text pattern

Candlewicking Stitch

Density	Dense	Medium		Light
Size	Smaller		Larger
Spacing	Narrow		Wide
Start/End Type	Feed		Run
	If the entry/exit points of sewing have been changed
Connection Points	This sewing attribute is available only when a text pattern is selected. Selecting connection point positions in a text pattern

E/V Stitch

		Select the E Stitch or the V Stitch.
E Stitch
		1 Interval	Narrow	Wide
		2 Stroke width	Short	Long
		3 Run pitch	Narrow	Wide
	Run time(s)	Specify the number of times the line is sewn.	1 time	5 times
	Stroke time(s)	Specify the number of times each stroke is sewn.	1 time	3 times
	Arrange
	Connection Points	This sewing attribute is available only when a text pattern is selected. Selecting connection point positions in a text pattern
V Stitch
		1 Interval	Narrow	Wide
		2 Stroke width	Short	Long
		3 Run pitch	Narrow	Wide
	Run time(s)	With the V stitch, the line and the strokes are sewn the same number of times.	1 time	5 times
	Arrange
	Connection Points	This sewing attribute is available only when a text pattern is selected. Selecting connection point positions in a text pattern

Chain Stitch

Stitch Type	Triangular	Diamond-shaped
Size	Smaller	Larger
Time	1 time	6 time
Arrange
Start/End Type	Feed	Run
Start/End Type	If the entry/exit points of sewing have been changed
Connection Points	This sewing attribute is available only when a text pattern is selected. Selecting connection point positions in a text pattern

Cutting

Leave uncut sections

Specify whether or not sections of the cutting line are to be left uncut.

This prevents the fabric from moving out of place during cutting.

If it is set to [On], cut them with scissors after the cutting step is finished.

Off

Use

For more cleanly cut edges, for example, on patches, select [Cutting only]. If the cut edge will be embroidered, for example, on appliqués, select [Cutting for covering edge of fabric].

Cutting only

Cutting for covering edge of fabric