Replacing the Presser Foot

1. Press (Needle position button) to raise the needle.

2. Touch to lock all keys and buttons.

   If the message [OK to automatically lower the presser foot?] appears on the LCD screen, touch [OK] to continue.

3. Raise the presser foot lever manually.

4. Press the black button on the presser foot holder and remove the presser foot.

   
   1. Black button
   2. Presser foot holder

5. Place the new presser foot under the holder, aligning the foot pin with the notch in the holder. Lower the presser foot lever manually so that the presser foot pin snaps into the notch in the holder.

   
   1. Notch
   2. Pin

6. Raise the presser foot lever to check that the presser foot is securely attached.

7. Touch to unlock all keys and buttons.