Changing the Stitch Width During Sewing

Set the sewing speed controller to control the stitch width to make subtle changes in the stitch width during sewing. When this function is set, the foot controller must be used to sew.

1. Attach the foot controller. (Using Advanced Multi-Function Foot Controller)

2. Select and attach zigzag foot “J”.

3. Touch in the length display to shorten the stitch length.

   
   • The setting will vary according to the kind of fabric and the thickness of the thread, but a length of 0.3 to 0.5 mm (approx. 1/64 to 1/32 inch) is best for satin stitches.

4. Touch to display [Width Control].

5. Set the [Width Control] to on.

   

6. Touch [OK].

   • The screen appears as shown below.
     

7. While sewing, slide the sewing speed controller to adjust the stitch width.

   Adjust the sewing speed with the foot controller.

   narrower wider

   

8. When you are finished sewing, set the [Width Control] back to off.