Making Adjustments
If your sewing does not turn out well, sew trial stitches using the same conditions as the real sewing, and adjust the stitch pattern as explained below.
If the stitch pattern does not turn out well even after making adjustments based on the stitch pattern, make adjustments for each stitch pattern individually.
- This function is available for the following stitch patterns.
- All stitch patterns in
, 
, 
, 
and 
in 
- All stitch patterns in
Touch
and select 
.
Attach advanced monogramming foot “N+” and sew the stitch pattern.
Compare the finished stitch pattern to the illustration of the correct stitch pattern below. Touch
, and then adjust the stitch pattern with the [Fine Adjust Verti.] or [Fine Adjust Horiz.] displays.
Problem
Solution
The stitch pattern is bunched.
Touch to increase the number in the [Fine Adjust Verti.] display. The stitch pattern will lengthen.
The stitch pattern has gaps.
Touch to decrease the number in the [Fine Adjust Verti.] display. The stitch pattern will shorten.
The stitch pattern is skewed to the left.
Touch to increase the number in the [Fine Adjust Horiz.] display. The stitch pattern will slide to the right.
The stitch pattern is skewed to the right.
Touch to decrease the number in the [Fine Adjust Horiz.] display. The stitch pattern will slide to the left.
Sew the stitch pattern again.
Adjust until the stitch pattern comes out correctly.
- You can sew with the setting screen on the display.