Attaching the Embroidery Frame
- When attaching/removing the 465 mm × 297 mm (approx. 18-1/4 inches × 11-5/8 inches) embroidery frame to/from the machine, angle the embroidery frame so that the lever at the top does not hit the embroidery foot, as shown in the illustration. If the embroidery frame lever is hidden by the fabric, attach/remove it so that the rectangular area (indentation) of the inner frame does not touch the presser foot.
- Embroidery frame lever
- Embroidery foot
- Rectangular area (indentation) (Make sure that this area does not touch the embroidery foot.)
- Wind embroidery bobbin thread and insert the bobbin before attaching the embroidery frame. Check that there is enough thread in the bobbin.
- Make sure that the frame-securing lever is correctly lowered after the embroidery frame has been installed in the embroidery frame holder.
Press
(Presser foot lifter button) to raise the embroidery foot.Align the embroidery frame guide with the right edge of the embroidery frame holder.
- Embroidery frame holder
- Embroidery frame guide
Slide the embroidery frame into the holder, making sure to align the embroidery frame’s
with the holder’s 
.
- Arrow mark
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
- Frame-securing lever
Removing the Embroidery Frame
Raise the frame-securing lever.
Pull the embroidery frame toward you.
