Checking the Embroidery Pattern with the Projector

Using the projector, the selected embroidery pattern can be projected onto the fabric.

1. Make sure that the embroidery frame is attached to the machine, and then touch in the following screens.

   • Embroidery edit screen
   • Embroidery screen
   • Stitch settings screen of IQ Designer
     
   • If a message appears, warning that the carriage will be moved, touch [OK].
     The embroidery pattern is projected onto the fabric.

2. Check the embroidery pattern projected onto the fabric. If necessary, from the screen of the machine, change the location of the projection area on the fabric and the projector settings.

   
   
   1. Drag a blue line at one of the four corners to move the embroidery frame and change the location of the projection area on the fabric.
   2. Touch to display the following screen.
      

      The function [Projector Edit with Stylus], which projects editing keys onto the fabric, can be switched on or off.
      With [Background Color], the background color of the projector can be selected.

   3. Embroidery pattern projected by the projector
   4. Editing keys for operating with the dual purpose stylus. (Using the Dual Purpose Stylus To Edit the Embroidery Pattern Projected Onto Fabric (Projector Edit with Stylus))

3. If necessary, edit the pattern.

   
   • Editing keys that are not displayed cannot be used with this function. To use all editing functions, touch to turn off projection.
     For details on each key, refer to [Edit] Window or [Layout] Window.

4. After confirming the embroidery pattern, touch to turn off projection.