Using the Camera View Window

The camera built into this machine can be used to easily align the embroidering position.

1. Use a chalk pencil to draw a cross at the desired embroidering location.
   And then, hoop the fabric

   
   1. Chalk pencil mark

2. Select the pattern on your machine and touch [Embroidery].

3. Touch in the embroidery screen.

   

4. Touch to set the starting point to the center of the pattern.

   

5. Touch [OK].

6. Press (Presser foot lifter button) to lower the embroidery foot.

7. Touch .

   

8. Touch the positioning keys to move the embroidery frame until the cross-shaped chalk mark drawn on the fabric is displayed in the camera view window.

   

9. Touch to display the grid lines.

10. Touch the orientation keys until the grid lines are parallel with the chalk mark drawn on the fabric.

11. Touch the positioning keys to move the embroidery frame until the center point of the pattern in the camera view window is aligned with the chalk mark drawn on the fabric.

    
    1. Center point of the pattern
    2. Chalk mark

12. Touch [OK] to return to the previous screen.