Using the Embroidery Positioning Sticker

The embroidering position can easily be aligned using the machine’s built-in camera and the included embroidery positioning sticker.

1. Touch [Layout] to display the [Layout] window, and then touch .

   

2. Following message appears. Touch [OK].

   

3. Select the position you want to set as the reference point. For this example, select the left bottom of the embroidery pattern as the reference point.

   

   Select if you want to embroider referring the embroidery positioning sticker as the center of the pattern.

4. Affix the embroidery positioning sticker to the fabric so the center of the larger circle of the sticker is aligned.

   
   1. Embroidery positioning sticker
   2. Reference point
   3. Embroidery field
      • Affix the embroidery positioning sticker so that the smaller circle is on top. The angle of the pattern depends on the angle at which the embroidery positioning sticker is affixed. In order to change the angle at which the pattern will be embroidered, affix the embroidery positioning sticker at the desired angle.

5. Touch [Scan].

   Attach embroidery foot “W” before touching [Scan].

   

6. Following message appears. Touch [OK].

   
   • The built-in camera automatically searches for the embroidery positioning sticker, and then the carriage is moved so that the selected reference point of the embroidery pattern is aligned with the embroidery positioning sticker.

7. A reminder message appears. Remove the embroidery positioning sticker from the fabric, and touch [OK].

   To remove the embroidery positioning sticker more easily, touch so that the carriage moves slightly forward and away from under the needle.

   
   

8. Press the “Start/Stop” button to begin embroidering.