Using the Dual Purpose Stylus To Edit the Embroidery Pattern Projected Onto Fabric (Projector Edit with Stylus)

From the embroidery edit screen or embroidery screen, you can project the embroidery pattern onto the fabric, then edit it.

1. Prepare the dual purpose stylus.

   For details on how to use the dual purpose stylus, refer to Operating the Projector with the Dual Purpose Stylus.

2. Touch in the embroidery edit screen or embroidery screen. (Checking the Embroidery Pattern with the Projector)

3. If necessary, press the button of the dual purpose stylus to turn on the light over the key to change the projection.

   
   
   1. Select whether to position the editing keys (projected by the projector) at the left, right or bottom.
   2. Displays keys for changing the location of the projection area on the fabric. (Changing the Location of the Projection Area)
   3. Minimizes the keys projected by the projector.
      

4. Press the button of the dual purpose stylus to turn on the light over or in order to edit the embroidery pattern.

   The camera detects the light, and the embroidery pattern is edited as specified.

   When finished editing, touch in the LCD screen to turn off projection.

Positioning Mode

1. Move the embroidery pattern.

Rotation Mode

1. Rotates the embroidery pattern counterclockwise.
2. Rotates the embroidery pattern clockwise.

Resizing Mode (Embroidery Edit Screen Only)

1. Changes the height of the embroidery pattern.
2. Changes the width of the embroidery pattern.
3. Locks/unlocks the aspect ratio.

Changing the Location of the Projection Area

1. Make sure that the embroidery frame is attached to the machine, and then touch in the following screens.

   • Embroidery edit screen
   • Embroidery screen
   • Stitch settings screen of IQ Designer

2. If was touched in the embroidery edit screen or embroidery screen, place the point of the dual purpose stylus over , and then press the button to turn on the light.

   

3. Place the point of the dual purpose stylus over a key in , and then press the button to turn on the light.

   
   1. Select whether to position the keys (projected by the projector) at the left, right or bottom.
   2. Switches the projection to edit mode (embroidery edit screen and embroidery screen only). (Using the Dual Purpose Stylus To Edit the Embroidery Pattern Projected Onto Fabric (Projector Edit with Stylus))
   3. Minimizes the keys projected by the projector.
   • The camera detects the light of the dual purpose stylus, and the location of the embroidery pattern projection area is changed as specified.

4. After confirming the settings, touch in the LCD screen to turn off projection.