Confirming the Pattern Position

Checking the Needle Drop Point with the Projector

With the projector pointer, you can check the needle drop point before embroidering.

1. Touch in the embroidery screen.

   
   • The pointer of the projector indicates the needle drop point onto the fabric.
     
   1. Needle drop point
      • The color and shape of the pointer can be changed in the settings screen.
        
      • With fabric that has a very uneven surface such as thick fabric or quilting, the fabric thickness may not be correctly measured. In this case, the pointer indication should be used only as a reference.

Checking the Pattern Position

The carriage moves and shows the pattern position. Watch the embroidery frame closely to make sure the pattern will be embroidered in the right place.

1. Touch .

   

2. Touch the key for the position that you want to check.

   
   1. Touch to check the selected position.
   2. Touch to check the entire embroidering area.
      
   • The carriage will move to show the pattern position.
     • Touch so that the pointer of the projector indicates the needle drop point onto the fabric.
     CAUTION

     • Do not lower the needle when the embroidery frame is moving. If the needle is down, it could break and result in injury.

3. Touch [OK].