Embroidering Quilting Border Patterns (Auto Split Quilt Sash)

Use the embroidery positioning stickers to connect the quilting border patterns that has been divided into four sections. The built-in camera will assist with placement.

It is recommended to measure the size of quilting border you want to embroider in the beginning.

1. Touch .

2. Select one of the rectangular quilting border categories. For this example, select single-color rectangular quilting border patterns.

   
   1. Single-color rectangular quilting border patterns
   2. Two-color rectangular quilting border patterns
   3. Hexagonal quilt border patterns
   4. Edge-to-Edge quilt patterns
      • The hexagonal quilt borders patterns and edge-to-edge quilt patterns are not available for this function.

3. Select the quilt border pattern, and then touch [Set].

4. Select how to divide the pattern. For this example, select “Auto split quilt sash”.

   
   1. Auto split quilt sash
   2. Semi-Auto split quilt sash
      For details, refer to Embroidering Quilting Border Patterns (Semi-Auto Split Quilt Sash)
      • The size of item that can be created differs depending on the type of split that was selected. Check the layout of “Auto split quilt sash”, and then select “Semi-Auto split quilt sash” if the layout did not appear as desired.

5. Specify the size of embroidery frame to be used. Enter values for the width and height of the sash and quilting border, and then touch [Set]. After entering all three values, touch [Next].

   
   1. Embroidery frame size
   2. Width
   3. Height
   4. Quilting border width

      To clear the value, touch [C].

   • The pattern appears with the specified settings applied.

6. Check the split pattern, and then touch .

   
   1. You can change the thread color.
   2. Select single stitching or triple stitching.
   • The data for the split embroidery pattern is saved on the machine.
     • The data for the split embroidery pattern cannot be saved on external media such as USB media.

7. To embroider the pattern, touch [OK].

   

8. Select the embroidering method, and then touch [Set].

   
   1. To embroider using the built-in camera for aligning the embroidering position, touch the key showing the entire pattern.
   2. To embroider by visually aligning the pattern sections, touch the pattern section to be embroidered.

      This manual shows method 1. For method 2, refer to Connecting the Pattern Sections Manually.

9. Touch [Embroidery].

10. Attach the embroidery frame along with the first section being embroidered, and scan the embroidery frame. For scanning the background, refer to Display the Fabric on the Screen.

    

11. Move and rotate the pattern to align with the background.

    
    • For moving or rotating the pattern, refer to [Layout] Window.

12. Embroider the first section.
    

13. After embroidering the first section, the following message appears. Touch [OK].

    

14. Touch .

    

15. Touch [OK].

    

16. Embroider the remaining sections following step 13 through 18 of Aligning Pattern Edges.