Needle Calibration for Camera/Projector

Setting the camera needle position is essential when you use camera or projector function. It is not necessary to perform this operation each time, but we recommend performing it when the needle is changed. Use the white calibration stickers (solid) included with the machine.

1. Touch to display [Needle Calibration for Camera/Projector] of the settings screen.

2. Touch .

   

3. Follow the on-screen instructions to complete the procedure.

   
   1. White calibration sticker
      • Use a new sticker. The camera needle position cannot be set correctly if there is a hole in sticker or if it is dirty.
   • The operation is finished when [OK] appears.
     
     • If [NG] appears, affix a new white sticker, and then touch [Retry]. If multiple attempts to set the position are not successful, contact your nearest authorized Baby Lock retailer.

4. Touch [OK] to memorize the calibration data.

   

5. Remove the sticker.