Sewing Settings

  1. Select whether to use the sewing speed controller to determine the zigzag width.

    Quilting with Satin Stitches

    When a straight stitch is selected, the sewing speed controller can be used to change the needle position.

  2. Make adjustments to character or decorative stitch patterns.

    Making Adjustments

  3. Adjust the presser foot height. Select the height of the presser foot when the presser foot is raised.
  4. Adjust the presser foot pressure. The higher the number, the greater the pressure will be. Set the pressure at [3] for normal sewing.
  5. Adjust the amount of fabric feeding of the compact digital dual feed foot.
  6. Select whether [1-01 Straight stitch (Left)] or [1-03 Straight stitch (Middle)] is the utility stitch that is automatically selected when the machine is turned on.
  7. Select whether utility stitches or quilting stitches are displayed first in the stitch selection screen.
  8. Select the height of the presser foot when sewing is stopped when the pivot setting is selected.

    Pivoting

  9. Select the height of the presser foot when the machine is set to free motion sewing mode.

    Free Motion Quilting

  10. When set to [ON], the thickness of the fabric is automatically detected by an internal sensor while sewing. This enables the fabric to be fed smoothly.

    Automatic Fabric Sensor System (Automatic Presser Foot Pressure)

    If the Fabric does not Feed

  11. When set to [ON], reinforcement stitches are sewn at the beginning and/or end of sewing for a reinforcement stitch pattern, even when (Reverse stitch button) is pressed.

    Reverse Stitches/Reinforcement Stitches

  12. Select whether to lower the presser foot automatically before starting sewing.

    Automatic Presser Foot Lowering Function and Thread Cutting Function

  13. Select whether pressing (Thread cutter button) automatically lowers the presser foot and cuts the thread. The presser foot will be raised after the thread is cut.

    Automatic Presser Foot Lowering Function and Thread Cutting Function

  14. You can save the current settings screen image in a USB media by touching this key when the USB media is inserted into the USB port. The files are saved in a folder labeled [bPocket].
  15. Reset settings on this page to original default. Some settings are not reset.

Print