Basting

1. Select the stitch below and attach presser foot “J”.

   

2. Keep pressing (Reverse stitch button) or (Reinforcement stitch button) to sew 4 stitches of reinforcement stitches, then press “Start/Stop” button to continue sewing.

   • Before sewing, pull up the bobbin thread, align it with the upper thread, and then pull them to the back of the machine.
     For clean stitching, hold these thread ends when starting to sew.

     Pulling Up the Bobbin Thread

   • You can set the stitch length between 5 mm (approx. 3/16 inch) and 30 mm (approx. 1-3/16 inches).
     1. Between 5 mm (approx. 3/16 inch) and 30 mm (approx.1-3/16 inches)

3. When sewing is finished, sew reinforcement stitches, and then cut the threads to a generous length.