If the Thread Breaks or the Bobbin Runs out of Thread During Embroidering
Redo the upper threading or replace the bobbin.
If the upper thread breaks, stop the machine, carefully check for and remove broken upper thread, trim the bobbin thread, and then rethread the machine.
If the bobbin thread is almost empty or broken, touch
of the displayed message, remove the embroidery frame, and then replace the bobbin.
Touch
.Touch
, 
, 
, or 
to move the needle back the correct number of stitches before the area where the thread broke, and then touch [OK].- Touch
to restart from the beginning.
If you cannot move back to the spot where the thread broke, touch
or 
to select the color and move to the beginning position of that color, then use 
, 
, 
, or 
to move ahead to slightly before where the thread broke.- Touch
Lower the presser foot and press the “Start/Stop” button to continue embroidering.